The switches in the remote allow you to set a "house code" for the remote to communicate with the system. If another nearby Lifestyle® system or RF device is interfering with control of your system, you can set a new house code.
Note: By default, all switches are in the down position.
Turn the system off
Move any of the first four switches up or down, in any combination, using a paper clip, push pin or similar object
Note: The first four switches designate the house code. Do not change any other switches
Replace the battery cover
on the display panel, press and hold the on/off button
On the display panel, press and hold the Mute button. Your current house code will appear on the display panel in the form of four rectangles, which represent the positions of switches 1 through 4
HOUSE CODE: Switches 1 – 4 down = 0 0 0 0 (current house code)
While holding the mute button, press any other button on the remote control. The display panel will show the new house code. This confirms that the system has recognized the new code
NEW HOUSE CODE: (Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0)
Release the mute button. The system remains off
If you have additional remote controls in other rooms, change the switches to match those of the first remote control by following steps 2 to 5 above. You do not need to repeat the remaining steps (6 to 8)
Note: To verify your system's house code at any time, press the display panel mute button while the system is off. The display shows the settings of switches 1 through 4.
